Pneumatic Fitting Machining at High Volume | New Partner
Pneumatic push-in fittings: turned bodies with milled hexes, Swiss-type bar feed, high-speed tray handling, vibration feeding from loose parts and burr control.
Pneumatic connector machining and automation
Pneumatic connector (Pneumatic fitting, Push-in fitting): A small body of revolution, or a turned part combined with a hex ... The page runs from what the part is and where it is used, through the machining process and machine selection, to automatic loading, feeding, inspection and the business lines that cover it.
What it is
Pneumatic connector (Pneumatic fitting, Push-in fitting) belongs to the hydraulic / pneumatic group. A small body of revolution, or a turned part combined with a hex; volumes are large and the piece price is sensitive.
Where these parts come from
The industries this type of workpiece appears in; each industry page sets out the machining and automation entry points for its parts.
How the part is machined
The features and operations this structure usually calls for. The sequence actually run is cut to the dimensions and geometric requirements on the drawing.
- Outside diameter and end faces
- Bore
- Thread
- Milling of the hex on combined parts
- Burr removal
Machine tools that fit (chosen by structure, not by brand)
Swiss-type machine or CNC lathe
Small parts in batches, with the main body completed in one clamping
Drill & tap center or machining center
The hex and the side holes
How it is loaded and unloaded automatically
The handling method follows from part size and weight, batch size, cycle time, the number of machines and the state the blanks arrive in.
Approach 1
Automatic bar feed on the Swiss-type machine
Approach 2
Gantry robot with trays for fast handling of small parts
Approach 3
One robot tending three machines, or a linked multi-machine line
Feeding and buffering
Inspection after machining
What this page is, and what it is not
No project case is shown for this part, and that is a statement of position, not an omission.
Product application — this page describes how this family of parts is generally machined and automated. That is manufacturing know-how that applies across the industry, not a description of one order.
Automation fit — the loading, feeding and inspection approaches listed above are options derived from structure, batch size and cycle time. The configuration actually built has to be calculated from the conditions of the project.
Verified project — no public project for this part has customer written authorization, so this page carries no project name, cycle time, output or result figure. For installed systems that are documented, see the shop-floor photos filed by business line: CNC Lathe Loading & Unloading — shop-floor photos and project cases.
Business lines that cover this part
Matched on how the part is made, not by hanging all of the business lines on it.
Pneumatic connector — frequently asked questions
What is the pneumatic connector?
Pneumatic connector belongs to the hydraulic / pneumatic group. A small body of revolution, or a turned part combined with a hex; volumes are large and the piece price is sensitive.
Where is the pneumatic connector used?
Commonly seen in these industries: Hydraulic & Pneumatic Parts. The industry pages on this site set out the machining and automation entry points for those workpieces.
How is the pneumatic connector machined?
The main operations are: Outside diameter and end faces; Bore; Thread; Milling of the hex on combined parts; Burr removal. The actual sequence is cut to the dimensions and geometric requirements on the drawing.
Which machine tools are used for the pneumatic connector?
Swiss-type machine or CNC lathe — Small parts in batches, with the main body completed in one clamping. Drill & tap center or machining center is the alternative: The hex and the side holes.
Can the pneumatic connector be loaded and unloaded automatically?
Yes. The usual approaches are: Automatic bar feed on the Swiss-type machine; Gantry robot with trays for fast handling of small parts; One robot tending three machines, or a linked multi-machine line. Whether it works depends on part size and weight, cycle time and machine layout, all of which have to be calculated.
How is the pneumatic connector fed automatically?
Options: Bar feeding; Trays with lanes; Vibration or flexible feeding when parts arrive loose. Feeding capacity is calculated from the parts per layer, the usable number of layers and the machining cycle; no fixed continuous running time is promised.
How is the pneumatic connector inspected after machining?
Checks usually applied: Threads; Dimensions; Appearance and burrs. Precision dimensional measurement needs dedicated measuring equipment and has different limits from vision inspection.
How is automation for the pneumatic connector planned?
Start from the part, not from a robot model: confirm the structure and the clamping datum first, then choose the machine combination and the automation method from batch size and cycle time, and finally check that feeding, buffering, inspection and safety interlocks form a closed loop.
Send the machine brand/model, part drawing or photo, blank and finished-part handling, single or multi-machine layout, target cycle and acceptance requirements.
Request an assessment Call +86 150 5020 2625