CNC Automation for EV and Liquid-Cooling Parts | New Partner
CNC automation for EV and liquid-cooling parts: connectors, motor end covers and battery structural parts tended automatically on lathes and machining centers.
Machining Automation for EV and Liquid-Cooling Parts
For parts such as liquid-cooling connectors and motor end covers, automation shows its advantage as soon as batch sizes come up.
EV & Liquid-Cooling Parts, in short
Liquid-cooling connectors, motor end covers, battery structural parts, flanges and die-cast housings are made in large quantities per part and go through several operations, so operators end up carrying parts between machines. The parts are small and numerous, which makes the load and unload motions highly repetitive, and sealing faces and threads are critical, so clamping has to be consistent. The usual approach is lathe loading and unloading, drill & tap center tending, automatic flipping for second clamping and central storage and feeding.
Typical pain points in this industry
Typical workpieces
Liquid-cooling parts and EV parts differ considerably in process; the proposal is assessed from the actual part drawings.
Automation approaches that fit
The following business-line solutions are commonly used on these workpieces.
On the shop floor
How this industry is served: related business lines
The same kind of workpiece is attacked differently at each operation. Below is the role each business line plays on these workpieces.
Machine-brand pages for these workpieces
This industry's workpiece types are not broken out as separate sections on the machine-brand pages, which follow machine type. Use the two overviews below to find a page by brand and by machine type.
Machining applications for these workpieces (13)
See how a workpiece is machined, on which machines, and how it is loaded, fed and inspected — the application pages also name the business line that covers it.
Liquid-cooling hose connector
Liquid-cooling connector, Coolant line connector, Fluid connector · Liquid cooling / thermal management
View detailsLiquid-cooling quick connector
Quick-disconnect connector, Push-to-connect connector, Blind-mate liquid-cooling connector · Liquid cooling / thermal management
View detailsCold plate interface part
Cold plate connector, Coolant distribution part · Liquid cooling / thermal management
View detailsDie-cast housing
Aluminum die-cast housing, Die-cast structural part · EV parts / 3C electronics
View detailsRelated case studies and knowledge
Send the machine brand/model, part drawing or photo, blank and finished-part handling, single or multi-machine layout, target cycle and acceptance requirements.
Request an assessment Call +86 150 5020 2625