Machine Compatibility
What can be automated is not decided by the machine brand but by these eight dimensions. Measure first, then design.
The eight dimensions of a compatibility assessment
If any one of these dimensions does not work, the system may not run on the shop floor. Together they form the checklist we measure on site.
Machine structure
Vertical / horizontal / gantry / sliding-head / turn-mill decides where the loading mechanism is mounted and in what form.
Door type
Whether there is an automatic door, how it opens and how fast it opens decides whether it can be converted to automatic opening and closing.
Chuck structure
The chuck type and whether a clamping signal can be brought out decide whether the clamping action can be controlled automatically.
Turret position
The interference zone of the turret and the tools decides the path the loading mechanism takes into the machine.
Loading window
The real opening size of the window decides the largest part and the largest gripper that can pass through it.
Part size
Length, diameter and weight decide the end-effector form and the feeding method.
Machine spacing
When several machines stand together, the distance between them decides the gantry crossbeam length and the robot working range.
Production cycle
How well the machining time per part matches the loading and unloading motion decides how many machines one system can serve.
Machine and automation component brands in our material
The brands below come from the inner pages of the company brochure. Listing them shows the range of equipment we have dealt with; it is not a statement of partnership.
Note: The brand list above comes from the inner pages of the company brochure and describes the range of equipment in our fit experience. It does not mean authorized agency or partnership. The fit conclusion for a specific machine follows the on-site measurement.
Machine families covered by the machine-brand pages: CNC lathes and turning centers, sliding-head machines, vertical, horizontal, gantry, five-axis and high-speed machining centers, drill & tap centers and heavy machine tools.
From measurement to proposal in four steps
Part drawing or photos, machine model, the current manual process and daily output.
Confirm the real data for the eight dimensions and identify the limiting conditions.
With the compatibility conclusion, the system composition, the model selection and the implementation advice.
Pre-purchase analysis → proposal → equipment purchase → delivery → installation and commissioning → technical support.
Where machine fit connects
The eight dimensions are applied on the two machine-brand batches and inside each business line.
Send your machine model and part details for a fit assessment
Photograph the machine door structure and the loading window, add the part dimensions and weight, and we can give you a first compatibility assessment.