Lens Mount Component: Horizontal Machining Center (600s Cycle)

Summary

This page is an industry-reference summary. Customer names are anonymized and integrator names are removed; machine brands and models are used only to explain the process. It is not a New Partner delivered case.

Configuration

• Machine: Okuma MB-5000H horizontal machining center (1 unit).
• Loading: pallet store with FMS stacker.
• Workpiece: lens mount component, aluminum and stainless steel.
• Cycle: machining 600s.

A typical sequence is: blanks enter a tray, pallet or conveyor; the pallet store with FMS stacker picks a part; the machine clamps and machines it; the finished part is unloaded or inspected. The exact fixture, buffer and flow follow the public source.

Reported results

The source reports a 99.5% improvement, without an acceptance report. No sample size, measurement period or acceptance protocol is provided, so it is not a New Partner commitment.

Applicability

For high-tech, pharma, aerospace and defense parts such as lens mount component. Best suited to stable, high-volume processes. Changeover capability and storage capacity are the main limits; calculate payback before scaling.

FAQ

Is this a New Partner delivered case? No. It is a public industry reference with the customer and integrator anonymized.

Which loading method fits lens mount component? The source uses pallet store with FMS stacker. Selection also depends on blank form, cycle time, machine layout and changeover frequency.

Can the cycle time be used as an acceptance target? Not directly. The source gives no timing method, sample size or acceptance report; re-measure with your own part, fixture and machine.

Source note

Source: public industry material. Customer and integrator anonymized. Equipment brands/models are for process illustration only. Missing: customer authorization, acceptance report and site photos.