Shaft, Disc, Ring, Hex Bar And Special-shaped Parts: CNC Lathe

Summary

This page is an industry-reference summary. Customer names are anonymized and integrator names are removed; machine brands and models are used only to explain the process. It is not a New Partner delivered case.

Configuration

• Machine: CNC lathe.
• Loading: built-in gantry robot.
• Workpiece: shaft, disc, ring, hex bar and special-shaped parts, metal.
• Cycle: loading 4s, overall cycle 10s.

A typical sequence is: blanks enter a tray, pallet or conveyor; the built-in gantry robot picks a part; the machine clamps and machines it; the finished part is unloaded or inspected. The exact fixture, buffer and flow follow the public source.

Reported results

The source reports efficiency and quality benefits, without an acceptance report. No sample size, measurement period or acceptance protocol is provided, so it is not a New Partner commitment.

Applicability

Best suited to stable cycle times, parts inside the gantry envelope and multi-machine lines. Frequent changeovers require separate allowance for fixture changes, storage switching and gantry clearance.

FAQ

Is this a New Partner delivered case? No. It is a public industry reference with the customer and integrator anonymized.

Which loading method fits shaft, disc, ring, hex bar and special-shaped parts? The source uses built-in gantry robot. Selection also depends on blank form, cycle time, machine layout and changeover frequency.

Can the cycle time be used as an acceptance target? Not directly. The source gives no timing method, sample size or acceptance report; re-measure with your own part, fixture and machine.

Source note

Source: public industry material. Customer and integrator anonymized. Equipment brands/models are for process illustration only. Missing: customer authorization, acceptance report and site photos.