Micro Valve Machining: Small Features, Clean Parts | New Partner
Micro valves: small valve cavities and mating bores, micro holes and restrictors, residual chip control, turn-mill or Swiss-type machining and full inspection.
Micro valve machining and automation
Micro valve (Small valve, Precision valve): A compact valve with small overall dimensions ... The page runs from what the part is and where it is used, through the machining process and machine selection, to automatic loading, feeding, inspection and the business lines that cover it.
What it is
Micro valve (Small valve, Precision valve) belongs to the hydraulic / precision group. A compact valve with small overall dimensions; the valve cavity and the mating bores are held to tight tolerances. Often stainless steel, or a stainless steel and engineering-plastic combination.
Where these parts come from
The industries this type of workpiece appears in; each industry page sets out the machining and automation entry points for its parts.
How the part is machined
The features and operations this structure usually calls for. The sequence actually run is cut to the dimensions and geometric requirements on the drawing.
- Machining of the small valve cavity and the bores
- Finishing of the mating faces
- Micro holes and restrictor holes
- Burr removal, where tiny residual chips are the critical risk
- Cleaning
Machine tools that fit (chosen by structure, not by brand)
Swiss-type or turn-mill machine
Small parts with many features; one clamping avoids secondary positioning
Compact machining center or drill & tap center
Micro holes and side features
How it is loaded and unloaded automatically
The handling method follows from part size and weight, batch size, cycle time, the number of machines and the state the blanks arrive in.
Approach 1
Automatic bar feed on the Swiss-type machine
Approach 2
Robot with trays for small batches and many variants
Approach 3
Full visual inspection after machining
Feeding and buffering
Inspection after machining
What this page is, and what it is not
No project case is shown for this part, and that is a statement of position, not an omission.
Product application — this page describes how this family of parts is generally machined and automated. That is manufacturing know-how that applies across the industry, not a description of one order.
Automation fit — the loading, feeding and inspection approaches listed above are options derived from structure, batch size and cycle time. The configuration actually built has to be calculated from the conditions of the project.
Verified project — no public project for this part has customer written authorization, so this page carries no project name, cycle time, output or result figure. For installed systems that are documented, see the shop-floor photos filed by business line: CNC Lathe Loading & Unloading — shop-floor photos and project cases.
Business lines that cover this part
Matched on how the part is made, not by hanging all of the business lines on it.
Micro valve — frequently asked questions
What is the micro valve?
Micro valve belongs to the hydraulic / precision group. A compact valve with small overall dimensions; the valve cavity and the mating bores are held to tight tolerances. Often stainless steel, or a stainless steel and engineering-plastic combination.
Where is the micro valve used?
Commonly seen in these industries: Electronics & Precision Enclosures, Medical & Implant Parts, EV & Liquid-Cooling Parts. The industry pages on this site set out the machining and automation entry points for those workpieces.
How is the micro valve machined?
The main operations are: Machining of the small valve cavity and the bores; Finishing of the mating faces; Micro holes and restrictor holes; Burr removal, where tiny residual chips are the critical risk; Cleaning. The actual sequence is cut to the dimensions and geometric requirements on the drawing.
Which machine tools are used for the micro valve?
Swiss-type or turn-mill machine — Small parts with many features; one clamping avoids secondary positioning. Compact machining center or drill & tap center is the alternative: Micro holes and side features.
Can the micro valve be loaded and unloaded automatically?
Yes. The usual approaches are: Automatic bar feed on the Swiss-type machine; Robot with trays for small batches and many variants; Full visual inspection after machining. Whether it works depends on part size and weight, cycle time and machine layout, all of which have to be calculated.
How is the micro valve fed automatically?
Options: Bar feeding; Trays. Feeding capacity is calculated from the parts per layer, the usable number of layers and the machining cycle; no fixed continuous running time is promised.
How is the micro valve inspected after machining?
Checks usually applied: Micro-hole size and clearance; Mating faces; Residual chips and cleanliness. Precision dimensional measurement needs dedicated measuring equipment and has different limits from vision inspection.
How is automation for the micro valve planned?
Start from the part, not from a robot model: confirm the structure and the clamping datum first, then choose the machine combination and the automation method from batch size and cycle time, and finally check that feeding, buffering, inspection and safety interlocks form a closed loop.
Send the machine brand/model, part drawing or photo, blank and finished-part handling, single or multi-machine layout, target cycle and acceptance requirements.
Request an assessment Call +86 150 5020 2625