RASOMA DS Vertical Turning: Pick-Up Spindles and Sub-Six-Second Handling

The supplier source identifies the RASOMA DS series.

Technical application analysis. Components not specified in the source; RASOMA DS vertical turning series; pick-up spindle with external presentation.

Reference configuration and timing

The supplier source identifies the RASOMA DS series.
Under its stated feed and conveying conditions, spindle loading/unloading is described as less than 6 s.
RASOMA and GROB are different brands.

Engineering evaluation

Specify the pickup location, grip face and chip-cleaning process. A moving spindle still needs a blank presented in a stable orientation; the tray or track provides that function.

Compare an external robot at equivalent operation boundaries, including footprint, fixture changes and recovery. The short auxiliary figure is not a guarantee for every DS model and component.

Selection conditions and evidence limits

The supplier introduction lacks a complete chain to current manufacturer options and independent project acceptance. No added part range, savings or New Partner implementation is asserted.

Application questions

Does a pick-up spindle need a feeder?

It still requires correctly positioned available blanks and an appropriate finished-part route.

Should this replace a GROB solution page?

No. Brand and machine identity must remain separate.

Sources and evidence

Source record 125 — www.ouzhoujc.com (Chinese reference)

Reviewed 4 November 2026. Source statements and engineering evaluation are identified separately. The references do not establish a New Partner delivery or customer acceptance result.