XKNC-100GL Small-Part Turning: Pneumatic Handling and Feed Presentation

The source identifies the XKNC-100GL and a shortest reported spindle-front exchange of 7.5 s.

Technical application analysis. Small turned components; Kitamura XKNC-100GL reference; pneumatic manipulator with application-specific feeding.

Reference configuration and timing

The source identifies the XKNC-100GL and a shortest reported spindle-front exchange of 7.5 s.
Pneumatic handling can use different gripping methods; vacuum is an example, not a standard feature for every part.

Engineering evaluation

Choose feed presentation from the part’s behavior. A vibratory feeder needs reliable orientation, while a matrix tray preserves a defined pose and can reduce contact between delicate finished surfaces.

The machine handshake must distinguish ready-to-unload, clamping complete and permission to start. Longer storage coverage cannot compensate for chip accumulation or exhausted cutting tools.

Selection conditions and evidence limits

C035 and C079 describe the same model and are consolidated. Actual material, accuracy and sustained running time are not verified project results.

Application questions

Is vacuum gripping suitable for every small turned part?

No. Contact area, leakage, surface condition and the required retention force must be evaluated.

Why use trays rather than bulk feeding?

Trays can preserve orientation and separate sensitive parts; the choice depends on reliable presentation and surface protection.

Sources and evidence

Reviewed 4 November 2026. Source statements and engineering evaluation are identified separately. The references do not establish a New Partner delivery or customer acceptance result.