GXC-25J Automatic Loading: Resolve the Cycle Unit Before Comparing

The listed pickup range is 7–100 mm long, 3–30 mm diameter and 0.8 kg.

Technical application analysis. Small components in the stated handling range; GXC-25J combined lathe; integrated manipulator.

Reference configuration and timing

The listed pickup range is 7–100 mm long, 3–30 mm diameter and 0.8 kg.
The cycle unit is written as cycles/S ≤10; it cannot safely be rewritten as one cycle per 10 s.

Engineering evaluation

Request the original specification with a confirmed unit and timing boundary. Cycles per second and seconds per cycle are reciprocals; the same numeral can imply radically different performance. Confirm whether door and clamp actions are included.

Keep manipulator pickup capacity separate from machining capability. A grippable diameter does not establish that the lathe can complete every operation on that component; tooling, balance and seating still need validation.

Selection conditions and evidence limits

The unit inconsistency remains unresolved. No ten-second guarantee, final-part precision or New Partner acceptance is inferred from the other listed parameters.

Application questions

Can the ambiguous unit be normalized to seconds?

Not until the supplier confirms the intended quantity and boundary.

Is the pickup range a cutting-capacity specification?

No. The handling and machining limits need separate documentation.

Sources and evidence

Source record 131 — www.jc35.com (Chinese reference)

Reviewed 4 November 2026. Source statements and engineering evaluation are identified separately. The references do not establish a New Partner delivery or customer acceptance result.