C6245A Two-Lathe Gantry: 20 kg Parts and Alternative Outfeeds

The product description uses two C6245A lathes and right-side feeding.

Technical application analysis. Components up to 20 kg in the supplier description; two C6245A CNC lathes; heavy gantry with right-side storage.

Reference configuration and timing

The product description uses two C6245A lathes and right-side feeding.
It states parts within 20 kg and approximately 14–16 s for exchange.
Discharge options include a chute, chain conveyor or return to storage.

Engineering evaluation

Choose the outfeed around surface protection and downstream handling. Each route changes travel and gripping actions, so do not assume all three share one measured cycle. Returning finished parts requires a clear pocket-state record.

Include both grippers, carried components, offset and inertia in gantry selection. Test unequal machining times and access for replenishment when the other machine is waiting for service.

Selection conditions and evidence limits

This is a supplier configuration, without a named accepted customer installation. Part dimensions, material and sustained production are not provided.

Application questions

Can a finished part return to the same storage system?

Yes in the stated option, but blank and finished positions need reliable state tracking.

Is 20 kg enough to size the gantry?

No. Tooling and dynamic load conditions also govern the axes and wrist.

Sources and evidence

Source record 81 — www.dongbuskgroup.com (Chinese reference)

Reviewed 4 November 2026. Source statements and engineering evaluation are identified separately. The references do not establish a New Partner delivery or customer acceptance result.