M-ONE APC VMC: Rotary Clearance and Exchange-Time Questions

The supplier page describes a 180° rotary dual-pallet APC.

Technical application analysis. Fixture-mounted workpieces; M-ONE 10 APC vertical machining center reference; 180-degree dual-pallet exchange.

Reference configuration and timing

The supplier page describes a 180° rotary dual-pallet APC.
Its translated “under 7 seconds” phrasing does not establish a confirmed complete loading/unloading time.

Engineering evaluation

Check fixture heights and workpiece overhang through the complete rotation. An exchangeable pallet establishes movement into the machine; it does not explain how loose blanks are located and clamped.

Request a model-matched drawing and timing sequence identifying unlock, lift, rotate, locate and clamp. This makes the quotation testable without importing inconsistent dimensions from the supplier page.

Selection conditions and evidence limits

Mixed size and load statements are not adopted as confirmed specifications. A marketplace description is not evidence of an installed customer system.

Application questions

Can under seven seconds be used as an acceptance target?

Not until the builder confirms the configuration and what the timed sequence includes.

What should the clearance check include?

Both fixtures, part overhang, clamps, gripper withdrawal and all swept positions during the 180-degree exchange.

Sources and evidence

Source record 46 — www.100lbj.com (Chinese reference)

Reviewed 4 November 2026. Source statements and engineering evaluation are identified separately. The references do not establish a New Partner delivery or customer acceptance result.